Return to Question

For moderator elections, this script greatly helps vet and compare candidates.

###Features:

• Lists candidates in sorted order. Find him/her in a repeatable, predictable, location every page visit.
• Click on a jump-table row to instantly scroll to that candidate.
• Save a bookmark that opens the page to that candidate's entry, every time.
• Like, Hide, or Reject a candidate. Save your data between page visits and between tabs.
• Provides direct links to a candidate's entry on the Stack Exchange Moderator Candidate Statistics (SEMC) page. (Unfortunately, that site has been down for a great many months now.)
• If you open one of those SEMC links, the script automatically scrolls to the targeted user (even while the SEMC page loads and settles).
• If you downvoted a candidate in the primary, then those users are auto-rejected when you visit the primary page.
• Works on all SE Election pages. _{(Not tested on Non English sites, but should work except for any formatting issues.)}

###Screenshots:

###Install:

1. This script requires Tampermonkey, Violentmonkey, or a userscript engine that supports @require and all the GM_ functions used.
   GM-4+ will not be supported at this time.

2. To install, click here (Stack Exchange Election Assistant install at GitHub) Install.
   
   

###Source code: Is on GitHub at BrockA/SE-Election-Assistant.

You may also make bug reports, pull-requests, etc. there.

###Reference:

• To get to the election pages, add election/ to the site's home address.
  For example: http://biology.stackexchange.com/election/ .
  This goes straight to:

  • Any current elections, or
  • It shows the last election if the site has had only one, or
  • It shows a list of all elections that have been held for the site.
    
    

• Also, find a list of all site's last, or current, elections on the Stack Exchange Moderator Candidate Statistics main page (when/if it comes back online).

For moderator elections, this script greatly helps vet and compare candidates.

###Features:

• Lists candidates in sorted order. Find him/her in a repeatable, predictable, location every page visit.
• Click on a jump-table row to instantly scroll to that candidate.
• Save a bookmark that opens the page to that candidate's entry, every time.
• Like, Hide, or Reject a candidate. Save your data between page visits and between tabs.
• Provides direct links to a candidate's entry on the Stack Exchange Moderator Candidate Statistics (SEMC) page. (Unfortunately, that site has been down for a great many months now.)
• If you open one of those SEMC links, the script automatically scrolls to the targeted user (even while the SEMC page loads and settles).
• If you downvoted a candidate in the primary, then those users are auto-rejected when you visit the primary page.
• Works on all SE Election pages. _{(Not tested on Non English sites, but should work except for any formatting issues.)}

###Screenshots:

###Install: (Note that this script requires Tampermonkey, Violentmonkey, or a userscript engine that supports @require and all the GM_ functions used. GM-4+ will not be supported at this time.)

#
 Click to Install 
 

You may also make bug reports, pull-requests, etc. there.

###Reference:

• To get to the election pages, add election/ to the site's home address.
  For example: http://biology.stackexchange.com/election/ .
  This goes straight to:

  • Any current elections, or
  • It shows the last election if the site has had only one, or
  • It shows a list of all elections that have been held for the site.
    
    

• Also, find a list of all site's last, or current, elections on the Stack Exchange Moderator Candidate Statistics main page (when/if it comes back online).

For moderator elections, this script greatly helps vet and compare candidates.

###Features:

• Lists candidates in sorted order. Find him/her in a repeatable, predictable, location every page visit.
• Click on a jump-table row to instantly scroll to that candidate.
• Save a bookmark that opens the page to that candidate's entry, every time.
• Like, Hide, or Reject a candidate. Save your data between page visits and between tabs.
• Provides direct links to a candidate's entry on the Stack Exchange Moderator Candidate Statistics (SEMC) page. (Unfortunately, that site has been down for a great many months now.)
• If you open one of those SEMC links, the script automatically scrolls to the targeted user (even while the SEMC page loads and settles).
• If you downvoted a candidate in the primary, then those users are auto-rejected when you visit the primary page.
• Works on all SE Election pages. _{(Not tested on Non English sites, but should work except for any formatting issues.)}

###Screenshots:

###Install:

1. This script requires Tampermonkey, Violentmonkey, or a userscript engine that supports @require and all the GM_ functions used.
   GM-4+ is crap and will not be supported at this time.

2. To install, click here (Stack Exchange Election Assistant install at GitHub) Install.
   
   

###Source code: Is on GitHub at BrockA/SE-Election-Assistant.

You may also make bug reports, pull-requests, etc. there.

###Reference:

• To get to the election pages, add election/ to the site's home address.
  For example: http://biology.stackexchange.com/election/ .
  This goes straight to:

  • Any current elections, or
  • It shows the last election if the site has had only one, or
  • It shows a list of all elections that have been held for the site.
    
    

• Also, find a list of all site's last, or current, elections on the Stack Exchange Moderator Candidate Statistics main page (when/if it comes back online).

For moderator elections, this script greatly helps vet and compare candidates.

###Features:

• Lists candidates in sorted order. Find him/her in a repeatable, predictable, location every page visit.
• Click on a jump-table row to instantly scroll to that candidate.
• Save a bookmark that opens the page to that candidate's entry, every time.
• Like, Hide, or Reject a candidate. Save your data between page visits and between tabs.
• Provides direct links to a candidate's entry on the Stack Exchange Moderator Candidate Statistics (SEMC) page. (Unfortunately, that site has been down for a great many months now.)
• If you open one of those SEMC links, the script automatically scrolls to the targeted user (even while the SEMC page loads and settles).
• If you downvoted a candidate in the primary, then those users are auto-rejected when you visit the primary page.
• Works on all SE Election pages. _{(Not tested on Non English sites, but should work except for any formatting issues.)}

###Screenshots:

###Install:

1. This script requires Tampermonkey, Violentmonkey, or a userscript engine that supports @require and all the GM_ functions used.
   GM-4+ will not be supported at this time.

2. To install, click here (Stack Exchange Election Assistant install at GitHub) Install.
   
   

###Source code: Is on GitHub at BrockA/SE-Election-Assistant.

You may also make bug reports, pull-requests, etc. there.

###Reference:

• To get to the election pages, add election/ to the site's home address.
  For example: http://biology.stackexchange.com/election/ .
  This goes straight to:

  • Any current elections, or
  • It shows the last election if the site has had only one, or
  • It shows a list of all elections that have been held for the site.
    
    

• Also, find a list of all site's last, or current, elections on the Stack Exchange Moderator Candidate Statistics main page (when/if it comes back online).

For moderator elections, this script greatly helps vet and compare candidates.

###Features:

• Lists candidates in sorted order. Find him/her in a repeatable, predictable, location every page visit.
• Click on a jump-table row to instantly scroll to that candidate.
• Save a bookmark that opens the page to that candidate's entry, every time.
• Like, Hide, or Reject a candidate. Save your data between page visits and between tabs.
• Provides direct links to a candidate's entry on the Stack Exchange Moderator Candidate Statistics (SEMC) page.
• If you open one of those SEMC links, the script automatically scrolls to the targeted user (even while the SEMC page loads and settles).
• If you downvoted a candidate in the primary, then those users are auto-rejected when you visit the primary page.
• Works on all SE Election pages. _{(Not tested on Non English sites, but should work except for any formatting issues.)}

###Screenshots:

###Install:

1. This script requires Greasemonkey on Firefox, or Tampermonkey on Chrome, or a userscript engine that supports @require and all the GM_ functions used.

2. To install, click here (Stack Exchange Election Assistant install at GitHub) Install.
   
   

###Source code: Is on GitHub at BrockA/SE-Election-Assistant.

You may also make bug reports, pull-requests, etc. there.

###Reference:

• To get to the election pages, add election/ to the site's home address.
  For example: http://biology.stackexchange.com/election/ .
  This goes straight to:

  • Any current elections, or
  • It shows the last election if the site has had only one, or
  • It shows a list of all elections that have been held for the site.
    
    

• Also, find a list of all site's last, or current, elections on the Stack Exchange Moderator Candidate Statistics main page.

For moderator elections, this script greatly helps vet and compare candidates.

###Features:

• Lists candidates in sorted order. Find him/her in a repeatable, predictable, location every page visit.
• Click on a jump-table row to instantly scroll to that candidate.
• Save a bookmark that opens the page to that candidate's entry, every time.
• Like, Hide, or Reject a candidate. Save your data between page visits and between tabs.
• Provides direct links to a candidate's entry on the Stack Exchange Moderator Candidate Statistics (SEMC) page. (Unfortunately, that site has been down for a great many months now.)
• If you open one of those SEMC links, the script automatically scrolls to the targeted user (even while the SEMC page loads and settles).
• If you downvoted a candidate in the primary, then those users are auto-rejected when you visit the primary page.
• Works on all SE Election pages. _{(Not tested on Non English sites, but should work except for any formatting issues.)}

###Screenshots:

###Install:

1. This script requires Tampermonkey, Violentmonkey, or a userscript engine that supports @require and all the GM_ functions used.
   GM-4+ is crap and will not be supported at this time.

2. To install, click here (Stack Exchange Election Assistant install at GitHub) Install.
   
   

###Source code: Is on GitHub at BrockA/SE-Election-Assistant.

You may also make bug reports, pull-requests, etc. there.

###Reference:

• To get to the election pages, add election/ to the site's home address.
  For example: http://biology.stackexchange.com/election/ .
  This goes straight to:

  • Any current elections, or
  • It shows the last election if the site has had only one, or
  • It shows a list of all elections that have been held for the site.
    
    

• Also, find a list of all site's last, or current, elections on the Stack Exchange Moderator Candidate Statistics main page (when/if it comes back online).